Eric:
I am assuming that you are looking for a route reflector or looking glass
type device?
Any of the IP plus versions will give you bgp and the ability to do route
reflector or
import routes from any ebgp/ibgp source.
I would look at www.cisco.com and search for configuring bgp. There would
be a good start. In addition, some more information on what you want to
accomplish on your post will help people direct you to the right
information.
==DMT>
> -----Original Message-----
> From: Erik.E.Johansson@skanova.com [SMTP:Erik.E.Johansson@skanova.com]
> Sent: Tuesday, April 23, 2002 2:44 AM
> To: isp-bgp@isp-bgp.com; cisco-nsp@puck.nether.net
> Subject: [nsp] Is it possible to get a Cisco router to act as
> RouteServer?
>
> Hello,
>
> I wonder if it is possible to get a Cisco router to act as RouteServer?
> Which IOS do I need?
> How do I configure it?
>
> Thanx and regards,
> /Erik
>
> Email: erik.e.johansson@skanova.com
> Phone: 0703-791913
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:13 EDT