Try adding
set ppp secret client ....
GK
At 04:51 PM 1/8/98 +0100, you wrote:
>Hi,
>
>i tried a really simple dial on demand config,
>but there is one thing I don't understand.
>
>her the Config:
>
>set systemname cisco760
>
>cd lan
>set brid off
>set ip routing on
>set ip add 195.90.7.1
>set subnet 255.255.255.0
>
>set user livingston2
>set brid off
>set ip route destination 0.0.0.0/0 gateway 195.90.0.3
>set ip propagate off
>set ip 0.0.0.0
>set ip netmask 0.0.0.0
>set ip routing on
>set ip framing none
>set timeout 20
>set 1 number 0201190
>set 2 number 0201190
>set ppp secret host ...
>set ppp authentication outgoing chap
>
>The result is:
>
>cisco760> ping 195.90.0.3
>Start sending: 01/01/1995 00:00:06 L05 0 0201190 Outgoing Call
Initiated
>cisco760> 01/01/1995 00:00:07 L08 1 0201190 Call Connected
>cisco760> ProcessPkg(HOST_FACILITY)
>01/01/1995 00:00:08 L60 1 Password Not Found
>cisco760>
>
>Ups no password?
>
>The she's right :-)
>
>The livingston says:
>
>Received PAP_AUTH_REQ on port S4 of 14 bytes containing:
>01 01 00 0E 08 63 69 73 63 6F 37 36 30 00
> Packet Info: Code: 01, ID: 01, 14 bytes.
> Login ID: cisco760 (8 bytes), [0x636973636F373630]
> Password: (0 bytes), [0x]
>
>What can I do? Any hints are welcome.
>
>Greetings Thomas
>
>
>--
>-----DPN--Deutsches-Provider-Network----Bremen--------
> ISB GmbH Internet-Service, Beratung
> http://www.produkt.de/ vertrieb@is-bremen.de
> http://www.bremen-ports.de/
>------------------------------------------------------
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:14 EDT