[nsp] cisco & radius

From: Edward Henigin (ed@texas.net)
Date: Fri Jan 23 1998 - 09:59:13 EST

Next message: Dimitris Zisiadis: "[nsp] BGP load balancing"
Previous message: Pete Ashdown: "[nsp] Catalyst vs. Gigaswitch vs. others?"
Next in thread: Kyle D. Smith: "Re: [nsp] cisco & radius"
Reply: Kyle D. Smith: "Re: [nsp] cisco & radius"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Now I'm starting to remember why I dislike cisco and radius :/

from

http://cio.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/secur_c/scprt6/scratrib.htm

28 Idle-Timeout
        Sets the maximum number of consecutive seconds of idle
        connection allowed to the user before the session terminates.
        This attribute value becomes the per-user "session-timeout."
        This attribute is not valid for PPP sessions.

"not valid for PPP sessions"

Ok, then, how do you set idle timeouts for PPP sessions? On
a per-user basis? Using RADIUS?

TIA,

Next message: Dimitris Zisiadis: "[nsp] BGP load balancing"
Previous message: Pete Ashdown: "[nsp] Catalyst vs. Gigaswitch vs. others?"
Next in thread: Kyle D. Smith: "Re: [nsp] cisco & radius"
Reply: Kyle D. Smith: "Re: [nsp] cisco & radius"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:14 EDT