Re: [nsp] Routing based on source address

From: John Todd (jtodd@greyfox.digex.net)
Date: Tue Jan 27 1998 - 18:03:26 EST


On Tue, 27 Jan 1998, "Mark D. Nagel" wrote:

> On Tue, 27 Jan 1998 16:57:11 GMT,
> +++ Gerald Mutisya <Mutisya@africaonline.co.ke> (gerald) said:
>
[snip]
> Yes, you use policy routing to implement this, however, all packets
> will be process switched (at this time). To implement policy routing,
> you do something like the following (mostly from the CCO docs):
[snip]

As of 11.3, IP policy-route decisions are fast-switched. This is according
to the release notes for 11.3. It may be some time before you're
implementing 11.3, but at least policy fast-switching has made it into a
release, so it will be integrated into future releases (one would hope :).

http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/rn113m/rn113mft.htm#xtocid2362970

JT

---
John Todd - Director, Business Connectivity Technical Support
jtodd@digex.net - 301-847-5167 (direct) - 301-847-5082 (fax)
24-hour Support Line - 301-847-5200
DIGEX, Inc.



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:14 EDT