[nsp] 5 minute output rate 84000 bits/sec, 81 packets/sec

From: pankaj (pankaj@worldgatein.net)
Date: Fri Oct 05 2001 - 04:59:36 EDT

Next message: Andre D. Henry: "Re: PPTP woes"
Previous message: Vinod Anthony Joseph Cherunni: "[nsp] REG: OSPF Load Balancing"
Next in thread: Robert E. Seastrom: "Re: [nsp] 5 minute output rate 84000 bits/sec, 81 packets/sec"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Dear friends,

( two lines from output of command show int serial0/1 )
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 84000 bits/sec, 81 packets/sec

What does it exactly mean . Is it per second data transfer or is it average
of data transfer for 5minutes.
If it is average of 5min than is there any way to get exactly per second
data transfer on serial port

Thanks
Pankaj Patel

Next message: Andre D. Henry: "Re: PPTP woes"
Previous message: Vinod Anthony Joseph Cherunni: "[nsp] REG: OSPF Load Balancing"
Next in thread: Robert E. Seastrom: "Re: [nsp] 5 minute output rate 84000 bits/sec, 81 packets/sec"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:19 EDT