We just bought our first 7200 and I'm trying to work out
how best to use it. I've run across a pretty sticky problem
and I'm not finding any help in the fine manuals.
I'm using vlans on some Catalyst 2924XLs and bringing them into
the router using ISL trunking. This has worked swimmingly
for me on our 2600 and 3600 routers. When I use the same type
of configuration on the 7204 (VXR with NPE-224 running 12.0.5T)
I find that every time I add another subinterface with another
ISL color *all* the other subinterfaces on the port get reset.
They're not down long, but all of the BGP, OSPF, and HSRP
sessions get reset, which is unacceptable. The same configuration
on 2621s and 3640s does not do this.
Does anyone have any suggestions to help me figure out if
this is an idiosyncracy of the 7200 series, a hardware
problem, or a configuration issue?
Here's the basic setup. I'm using a PA-2FE-ISL in slot 2.
interface FastEthernet 2/0
no ip address
ip route-cache flow
duplex full
no shutdown
interface FastEthernet 2/0.300
encapsulation isl 300
ip address x.x.x.x m.m.m.m
no ip directed-broadcast
interface FastEthernet 2/0.301
encapsulation isl 301
ip address x.x.x.x m.m.m.m
no ip directed-broadcast
When I paste in that second subinterface definition (or
a third, etc.) *all* of the previously-defined subints
drop momentarily.
Thanks,
Spencer
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:19 EDT