Here's my i/f configuration:
interface Serial1/3
bandwidth 256
no ip address
ip pim sparse-mode
encapsulation frame-relay IETF
no ip mroute-cache
fair-queue
frame-relay lmi-type ansi
!
interface Serial1/3.1 point-to-point
bandwidth 256
ip address n.n.n.n x.x.x.x
ip pim sparse-mode
no ip mroute-cache
no cdp enable
frame-relay interface-dlci 403 CISCO
frame-relay ip rtp header-compression
!
Which of these features is not supported by CEF?
> -----Original Message-----
> From: Kinczli Zoltán [mailto:Zoltan.Kinczli@Synergon.hu]
> Sent: Thursday, October 18, 2001 5:45 AM
> To: francisv@dagupan.com; cisco-nsp@puck.nether.net
> Subject: RE: [nsp] Cisco express forwarding
>
> Hello,
>
> It indicates you have a feature configured on that
> i/f, sub-i/f, which is not supported by CEF.
>
> See also:
> http://www.cisco.com/warp/public/732/Tech/netflow/docs/cef_troubleshooting
> .pdf
>
> regards,
> --Z.
>
>
> -----Original Message-----
> From: francisv@dagupan.com
> Sent: Wed 10/17/2001 2:33 PM
> To: cisco-nsp@puck.nether.net
> Cc:
> Subject: [nsp] Cisco express forwarding
>
> Hi,
>
> I've enabled CEF on the 7206 router but upon inspecting the interfaces
> (show
> cef interfaces), one serial interface had this:
>
> Serial1/3 is up (if_number 8)
> Corresponding hwidb fast_if_number 16
> Corresponding hwidb firstsw->if_number 8
> Internet Protocol processing disabled
> Packets switched to this interface are dropped to the next slow path
>
> This serial is the interface for the frame-relay connection. The
> sub-interfaces also has "Packets switched to this interface are dropped to
> the next slow path". What does this mean?
>
> ---
> francis vidal [bitstop network services]
> streaming media + web services
> v(02)330-2871,(02)330-2872
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:20 EDT