you need to do a soft-clear of the session, just changing the
filter doesn't change what's already being advertised...
George
> Date: Tue, 23 Oct 2001 03:04:25 -0700 (PDT)
> From: "Edward S. Desouza" <edward_desouza@yahoo.com>
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] BGP advertisement + route maps
>
> Hi,
> On a cisco router, when I apply a route-map to a
> bgp peer ( ebgp peer ) and on that peer I also have
> applied a route-map for outgoing routes, when I give
> the command
>
> show ip bgp neig x.y.z.w advertis
>
> it gives advertised routes before passing through the
> route map.
>
> I was wondering if there is a command to find out the
> routes that are actually being advertised to my
> neighbor after passing through the route map.
>
> For eg.
>
> I am doing an AS path prepend with a neighbor.
> when I give the command show ip bgp nei x.y.z.w ad
>
> it shows the routes advertised, but not the length of
> the AS-path prepended routes, same hold true for MED
> etc....
>
>
> Besides logging onto the ebgp peer , is there a way to
> find out the routes and attributes being advertised on
> the local CISCO router ??
>
> Rgds,
> Edward
>
>
> =====
> Edward S. Desouza
> 23/24 Manali 5,
> Evershine Nagar,
> Malad (W),
> Bombay 400064.
> Tel :9122-8886362
>
> __________________________________________________
> Do You Yahoo!?
> Make a great connection at Yahoo! Personals.
> http://personals.yahoo.com
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:20 EDT