On Wed, Oct 31, 2001 at 11:06:24AM -0800, David Sinn wrote:
> Put a neighbor statement on the Juniper, and everything will come up
> correctly.
Any valid reason for why it would work in -S train but not in -ST? Doesn't
make sense to me.
> David
>
>
> > -----Original Message-----
> > From: Dmitri Kalintsev [mailto:dek@hades.uz]
> > Sent: Wednesday, October 31, 2001 1:55 AM
> > To: cisco-nsp@puck.nether.net
> > Subject: [nsp] 12.0ST, GEIP+, ospf.
> >
> >
> > Hi good people,
> >
> > I've stumbled upon an interesting problem: I have Juniper M10
> > running back
> > to back to 7500 with GEIP+ (prod. Oct 2001), and I can pass
> > any traffic, but
> > ospf won't come up (and cisco's input packet counters woudnt
> > increase at
> > all, but when I say ping over this link - they do) - cisco
> > would think it's
> > DR, juniper would get stuck in Init state. IOS is a definite culprit,
> > because I've booted cisco box with 12.0(18)S and ospf session
> > came right up
> > no problem. I've tried 12.0(18)ST and 12.0(17)ST2, both
> > failed to bring up
> > ospf session. I doubt it's an ospf problem on cisco, because
> > the very same
> > router would happily bring ospf session to very same M10 over
> > fastether.
> >
> > Anybody seen this? I need bloody 12.0ST, because I need LDP
> > (and I'm in no
> > mood for going for 12.1E).
> >
> > Thanks,
> > --
> > CCNP, CCDP (R&S) Dmitri E. Kalintsev
> > CDPlayer@irc Network Architect @ connect.com.au
> > dek @ connect.com.au phone: +61 3 9674 3913 fax: 9251 3666
> > http://-UNAVAIL- UIN:7150410 cell: +61 414 821 382
> >
> >
---end quoted text---
-- CCNP, CCDP (R&S) Dmitri E. Kalintsev CDPlayer@irc Network Architect @ connect.com.au dek @ connect.com.au phone: +61 3 9674 3913 fax: 9251 3666 http://-UNAVAIL- UIN:7150410 cell: +61 414 821 382
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:21 EDT