Re: [nsp] Cisco router + interfaces

From: Gert Doering (gert@greenie.muc.de)
Date: Fri Nov 02 2001 - 18:13:41 EST

Next message: andrew fort: "RE: [nsp] Running ssh on cisco"
Previous message: Ian Cox: "Re: [nsp] 1000baseT GBIC"
In reply to: Ryan O'Connell: "Re: [nsp] Cisco router + interfaces"
Next in thread: Chief Technology Officer-ISPKenya: "[nsp] Cisco router + interfaces"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

On Wed, Oct 31, 2001 at 09:02:59PM +0000, Ryan O'Connell wrote:
> > - E3
> 36x0 but only with ATM. You need to go to 7x00 series to get decent E3.

E3 using HSSI would also work in the 36xx.

I *do* still have hope that Cisco will bring a multi-E1 and a native E3/T3
interface for the 36xx series...

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert@greenie.muc.de
fax: +49-89-35655025                        gert.doering@physik.tu-muenchen.de

Next message: andrew fort: "RE: [nsp] Running ssh on cisco"
Previous message: Ian Cox: "Re: [nsp] 1000baseT GBIC"
In reply to: Ryan O'Connell: "Re: [nsp] Cisco router + interfaces"
Next in thread: Chief Technology Officer-ISPKenya: "[nsp] Cisco router + interfaces"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:22 EDT