The JetCore line cards all have part numbers starting with J- which makes a
nice change from Foundry's normally rather confusing nomenclature!
regards
Stuart
TNS SP Division
www.tns.co.uk/sp/
- Have Foundry really solved the "demand-based routing" and "ACL goes up
to CPU" issues with the JetCore ASICs ?
- Is it possible to have only JetCore-based modules on BigIrons and
NetIrons, or some useful line interfaces requires using the old modules
?
- How to recognize JetCore-equipped line cards by their part numbers ?
Rubens Kühl Jr.
-----Original Message-----
Anybody else out there have a question?
To: westligh@ohsu.edu
foundry-nsp@puck.nether.net
This e-mail is confidential and may be privileged.
It may be read, copied and used only by the intended recipient.
If you have received it in error, please contact the sender
immediately by return e-mail or by telephoning +44 (0)1691 663600.
Please then delete the e-mail and do not disclose its contents to
any person. We believe, but do not warrant, that this e-mail and
any attachments are virus free. You should take full responsibility
for virus checking. Total Network Solutions Ltd reserve the right
to monitor all e-mail communications through their internal and
external networks. Registered Office: The TNS Building, Maesbury Road,
Oswestry, Shropshire, SY10 8LJ. Registration number: 2629206
This archive was generated by hypermail 2b29 : Mon Aug 04 2003 - 04:10:05 EDT