You have FastIron (L2 switch) code installed on this box. Try the
NetIron code for L3 support. :)
-----Original Message-----
From: Terence Giufre-Sweetser [mailto:terry@tdce.com.au]
Sent: Monday, July 29, 2002 6:36 AM
To: foundry-nsp@puck.nether.net
Subject: First post...
I've been handed a NetIron "to fix and get going".
This "router" aint a router, what is going on???
[It's a very nice L2 switch tho'.]
Show tech says:
SW-NetIron# SW: Version 07.1.23T10 Copyright (c) 1996-1999 Foundry
Networks, Inc.
Compiled on Apr 18 2001 at 13:02:26 labeled as FWS07123
HW: NetIron Gigabit Switching Router, serial number 0b901a
400 MHz Power PC processor 740 (revision 8) with 32756K bytes of DRAM
16 100BaseT interfaces with Level 1 Transceiver LXT975
0 uplink interfaces
256 KB PRAM and 8*2048 CAM entries for DMA 1, version 0807
256 KB PRAM and 8*2048 CAM entries for DMA 2, version 0807
128 KB boot flash memory
4096 KB code flash memory
2048 KB BRAM, BM version 02
128 KB QRAM
512 KB SRAM
Octal System, Maximum Code Image Size Supported: 1965568 (0x001dfe00)
The system uptime is 46 minutes 56 seconds
The system started at 22:47:07 GMT+10 Mon Jul 29 2002
--- Terence C. Giufre-Sweetser+---------------------------------+--------------------------+ | TereDonn Telecommunications Ltd | Phone +61-[0]7-32369366 | | 1/128 Bowen St, SPRING HILL | FAX +61-[0]7-32369930 | | PO BOX 1054, SPRING HILL 4004 | Mobile +61-[0]414-663053 | | Queensland Australia | http://www.tdce.com.au | +---------------------------------+--------------------------+
This archive was generated by hypermail 2b29 : Mon Aug 04 2003 - 04:10:05 EDT