Andrew,
If I'm not mistaken, I believe that you can upgrade your code to 7.5.5a.
Who is your sales team/where are you located? You can also check with
our tech support group at support@foundrynet.com
Regards,
Marshall
408.586.1754 direct
408.586.1900 fax
408.398.0014 cell
-----Original Message-----
From: Andrew Lee [mailto:andrew@peak.org]
Sent: Friday, August 16, 2002 12:17 PM
To: Marshall Eisenberg
Cc: foundry-nsp@puck.nether.net
Subject: RE: [f-nsp] Code Image Size
I am just trying to see if its possible to upgrade the code (currently
7.1.14). I was told 7.5.5a was 3.5 meg, so I guess I can't run it.
On Fri, 16 Aug 2002, Marshall Eisenberg wrote:
> Andrew,
> What are you trying to do? Is your configuration file too big for the
> system?
>
> Regards,
>
> Marshall
> 408.586.1754 direct
> 408.586.1900 fax
> 408.398.0014 cell
>
>
> -----Original Message-----
> From: Andrew Lee [mailto:andrew@peak.org]
> Sent: Thursday, August 15, 2002 5:42 PM
> To: Marshall Eisenberg
> Cc: foundry-nsp@puck.nether.net
> Subject: RE: [f-nsp] Code Image Size
>
>
> M2 unfortunately
>
> On Thu, 15 Aug 2002, Marshall Eisenberg wrote:
>
> > Andrew,
> > The flash size is a function on the management module and cannot be
> > modified.
> >
> > Which type of management module do you have installed?
> >
> > Regards,
> >
> > Marshall
> > 408.586.1754 direct
> > 408.586.1900 fax
> > 408.398.0014 cell
> >
> > -----Original Message-----
> > From: Andrew Lee [mailto:andrew@peak.org]
> > Sent: Thursday, August 15, 2002 10:50 AM
> > To: foundry-nsp@puck.nether.net
> > Subject: [f-nsp] Code Image Size
> >
> >
> > Hi List,
> >
> > Quick question. 'sh flash' on my BI 4000 tells me:
> >
> > Maximum Code Image Size Supported: 2817536 (0x002afe00)
> >
> > How can I increase this? Is it a boot image thing? Is it a
> > size-of-my-flash thing?
> >
> > Thanks,
> > Andrew
> >
> >
> >
>
>
>
This archive was generated by hypermail 2b29 : Mon Aug 04 2003 - 04:10:05 EDT