Does anyone else find they way Juniper implemented handling CT3s rather
limited (specifically troubleshooting the DS3 instead of an individual
DS1). There is no single place to look for the DS3 media info that can not
be cleared by someone clearing the DS1, and you can not clear the DS3
media across the board without clearing all the DS1 media stats as
well. So it is possible to have 20 different values for the circuit. I
have suggested an option like 'show interfaces t1-0/0/0 extensive', but
have not received an answer back yet on that possibility.
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:35 EDT