M20 route-engine redundancy

From: Przemyslaw Karwasiecki (karwas@ifxcorp.com)
Date: Wed Apr 24 2002 - 17:23:25 EDT

Next message: Greg Ketell: "Re: M20 route-engine redundancy"
Previous message: Jared Mauch: "[j-nsp] t640/gibson logo"
Next in thread: Greg Ketell: "Re: M20 route-engine redundancy"
Reply: Greg Ketell: "Re: M20 route-engine redundancy"
Reply: Tony Mumm: "RE: M20 route-engine redundancy"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hello,

I have M20 with two route-engines carying production traffic.
Currently re0 is slave and re1 is master.

Can I upgrade software on re0 (slave) and reboot it somehow
without re master re-election?

I cannot affect production traffc, and I am affraid that after
reboot, re0 will be elected as master, and failover will reset
all BGP sessions etc. which i absolutly cannot allow to happen....

Thank you,

PRzemek

PS.
Is there any specific requirement for PCMCIA (external) flash
disks for M20?

Thanks

Next message: Greg Ketell: "Re: M20 route-engine redundancy"
Previous message: Jared Mauch: "[j-nsp] t640/gibson logo"
Next in thread: Greg Ketell: "Re: M20 route-engine redundancy"
Reply: Greg Ketell: "Re: M20 route-engine redundancy"
Reply: Tony Mumm: "RE: M20 route-engine redundancy"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:35 EDT