Walter,
Do you have traceoptions turned on in your config?
If so, what flags are you using and at what level and where?
-Julian
> -----Original Message-----
> From: Walter De Smedt [mailto:wdesmedt@pandora.be]
> Sent: Friday, May 03, 2002 6:34 AM
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] rpd scheduler slipping
>
>
> Hi,
>
> we recently get a couple of RPD_SCHED_SLIP rpd messages on our Juniper
> routers. Especially during the bgp route explosions of the last couple
> of days (cf. NANOG), which caused rpd scheduler slips of up
> to 16s. This
> caused the routers to loose isis adjacencies with their neighbor.
>
> Is there any way we can monitor which task is responsible for the high
> load of rpd and how we can avoid such slips?
>
> rgds,
>
> walter
>
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:35 EDT