Yes, this works. Know this works in case where the LAN connects to 2
different routers. This should also work when the lan connects to the
same router - not tried it.
Gotchas - Check that PIC hardware support CCC and use vlan > 512.
> -----Original Message-----
> From: Sabrina Minshall [mailto:sabrina@accesscom.com]
> Sent: Tuesday, May 28, 2002 1:49 PM
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] vlan-ccc
>
> I'm trying to connect 2 local networks (without having to repartion)
> using an M10 with vlan-ccc (so that they appear to be on the same
> subnet). Does anyone know if that can be done/works? MPLS would not
> be used in this case, I believe.
>
> Thanks,
>
> sabrina
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:35 EDT