Not sure about keeping the index consistent, but for MRTG it's
possible to configure it to graph by IP address so that it
dynamically gets the index with each run.
> -----Original Message-----
> From: Owens, Shane (EPIK.ORL) [mailto:sowens@epik.net]
> Sent: Thursday, June 27, 2002 3:12 PM
> To: juniper-nsp@puck.nether.net
> Subject: SNMP Index Changes
>
>
> Does anyone else have a problem with Juniper re-indexing the
> interfaces
> after reboot, software loads, RE-switches etc? We seem to
> re-index after
> each of these event even with no physical port changes to the
> equipment
> which wreaks havoc on backend trending systems like Concord and MRTG.
>
> Shane
>
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:36 EDT