MPLS - LDP

From: Matias Lambert (CEA) (matias.lambert@cea.ericsson.se)
Date: Wed Aug 01 2001 - 10:27:38 EDT

Next message: Gary Tate: "RE: MPLS - LDP"
Previous message: Mark Fullmer: "NetFlow export packet formats"
Next in thread: Gary Tate: "RE: MPLS - LDP"
Maybe reply: Gary Tate: "RE: MPLS - LDP"
Maybe reply: Gary Tate: "RE: MPLS - LDP"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,
Someone know if it is posible to put MPLS labeled routes ( using LDP as signalling ) in the inet.0 ?
LDP install routes in the inet.3, where they are only used by BGP.
Something like put traffic engineering bgp-igp in the MPLS statment ( but it only work for RSVP and static labels )
If it is imposible... why?
Thanks!!

> Matias Lambert
> Datacom & AN support
> Compañía Ericsson S.A.C.I.
> Service Solutions
> Tel: +54 11 4319 5500 ext.40245
> Fax: +54 11 4319 5603
> matias.lambert@cea.ericsson.se
>
>

application/octet-stream attachment: Matias_Lambert__CEA___E-mail_.vcf

Next message: Gary Tate: "RE: MPLS - LDP"
Previous message: Mark Fullmer: "NetFlow export packet formats"
Next in thread: Gary Tate: "RE: MPLS - LDP"
Maybe reply: Gary Tate: "RE: MPLS - LDP"
Maybe reply: Gary Tate: "RE: MPLS - LDP"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:36 EDT