Sorry, I meant you can just assign one COS value under
one single LSP.
--- Andrew Smith <as160@yahoo.com> wrote:
> Hi, Greg
>
> In line.
> --- Greg Ketell <gketell@juniper.net> wrote:
> > At 09:31 AM 8/8/2001, Andrew Smith wrote:
> > >Hi, Greg
> > >
> > >Thanks. Now I am almost golden. :)
> > >
> > >I still have some confusion about one of my
> > previous
> > >question. If I have IP streams with different
> TOS
> > bit
> > >set (say 0, 3, 7) and I want to them use the same
> > LSP.
> > > So you need to map the EXP bit into the queues.
>
> > Is
> > >it possible to map 3 different EXP bits under the
> > same
> > >LSPs along the transit LSRs
> >
> > Yes
>
> I was just playing with the CLI. It seems like under
> one LSP you can't assign just one class-of-service
> value. If this is the case then you can't have
> different EXP bits under one LSP. Did I miss
> something important here?
>
> TIA
> Andrew
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute
> with Yahoo! Messenger
> http://phonecard.yahoo.com/
>
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:36 EDT