[j-nsp] AW: [j-nsp] AW: [j-nsp] E1 interoperability

From: Strahler, Carsten (Carsten.Strahler@lambdanet.net)
Date: Wed Sep 05 2001 - 03:35:57 EDT

Next message: Jan Stanicek: "Minimal configuration for routing between two ports"
Previous message: Stephen Gill: "RE: [j-nsp] BGP tcp/179 security on JunOS"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi Preggie,

we use a M20 with 4-Port E1. We configured PPP on both ends and everything
works fine.
Did you check your converter ? In our network we use Pandacom boxes.

----------------------------------------------------------------
Carsten Strahler

Core Network Planning IP

Lambdanet Communications GmbH
Guenther-Wagner-Allee 13
D-30177 Hannover (Germany)

Phone +49 (0)511 / 84 88 - 12 86
Fax +49 (0)511 / 84 88 - 12 69
mailto:carsten.strahler@lambdanet.net
<mailto:carsten.strahler@lambdanet.net>

News & Facts finden Sie auf unserer Website: www.lambdanet.de
-----------------------------------------------------------

-----Ursprüngliche Nachricht-----
Von: Preggie Govender [mailto:pgovender@grintek.com]
Gesendet: Dienstag, 4. September 2001 14:57
An: Strahler, Carsten; juniper-nsp@puck.nether.net
Betreff: RE: [j-nsp] AW: [j-nsp] E1 interoperability

Hi Carsten,

I have it configured for PPP on the CISCO end

Regards,

Preggie

-----Original Message-----
From: Strahler, Carsten [mailto:Carsten.Strahler@lambdanet.net]
Sent: 04 September 2001 10:31
To: Preggie Govender; juniper-nsp@puck.nether.net
Subject: [j-nsp] AW: [j-nsp] E1 interoperability

Hi Preggie,

which encapsulation (PPP, Cisco-HDLC) do you have configured ?

We had a problem with a Cisco with auto-encapsulation on the X.21 interface.

regards

----------------------------------------------------------------
Carsten Strahler

Core Network Planning IP

Lambdanet Communications GmbH
Guenther-Wagner-Allee 13
D-30177 Hannover (Germany)

Phone +49 (0)511 / 84 88 - 12 86
Fax +49 (0)511 / 84 88 - 12 69
mailto:carsten.strahler@lambdanet.net
<mailto:carsten.strahler@lambdanet.net>

News & Facts finden Sie auf unserer Website: www.lambdanet.de
-----------------------------------------------------------

-----Ursprüngliche Nachricht-----
Von: Preggie Govender [mailto:pgovender@grintek.com]
Gesendet: Dienstag, 4. September 2001 10:17
An: juniper-nsp@puck.nether.net
Betreff: [j-nsp] E1 interoperability

Hi,

I've connected an M5 E1 G.703 (120 Ohm) interface to a G.703/X.21 converter
which is connected to a Cisco X.21 (high-density serial) interface. I'm
receiving an "Ino Framing errors, check FCS configuration" - I've changed
the configuration on the Juniper but to no avail - the Juniper is set-up for
unframed with internal clocking.

Please help !

Preggie

Next message: Jan Stanicek: "Minimal configuration for routing between two ports"
Previous message: Stephen Gill: "RE: [j-nsp] BGP tcp/179 security on JunOS"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:37 EDT