The "advertise-inactive" command allows you to advertise and export to your
peers all BGP routes whether they were selected as active or not.
Here is the link for that:
http://www.juniper.net/techpubs/software/junos50/swconfig50-routing/html/bgp
-config44.html#1016375
Thanks,
Mario Puras
JNCIS, CCNA, LSCP, MCP
SoluNet Technical Support
Network Support Engineer
We don't make network products,
we make them Work!
Mailto:mpuras@solunet.com
888.449.5766 (USA) / 888.SOLUNET (Canada)
-----Original Message-----
From: Przemyslaw Karwasiecki [mailto:karwas@ifxcorp.com]
Sent: Tuesday, October 02, 2001 3:09 PM
To: juniper@groupstudy.com; juniper-nsp@puck.nether.net
Subject: [j-nsp] BGP advertise-inactive
Hello,
Simple questions:
Does BGP ``advertise-inactive'' cause JunOS to
1) advertise best BGP routes which hasn't been injected into
Master Forwarding Table table because of better routes
from other protocols, or
2) advertise all BGP routes from all Adj-RIB-In(s)?
Thank you,
Przemek
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:37 EDT