show route table mpls.0
there you should see something like
100005 *[VPN/7] 02:16:09, metric 1
> via so-0/0/3.0, Pop
where 100005 is the VPN label for one of the vrfs configured in this PE, and
that label is asigned for the outgoing interface so-0/0/3.0
^ ^
==============ooo====(.)v(.)====ooo=====
Javier Antich Romaguera
Network Consultant
---------------------------------------------------------------------------
TELINDUS
Pza. Ciudad de Viena, 6-2º
28040 Madrid
---------------------------------------------------------------------------
javier.antich@telindus.es
tel: +34 91 456 00 08
fax: +34 91 536 10 74
---------------------------------------------------------------------------
For more information about our products and services,
please visit our website http://www.telindus.com
---------------------------------------------------------------------------
Full connectivity & mobility
==================ooo0===0ooo========
> -----Mensaje original-----
> De: Strahler, Carsten [SMTP:Carsten.Strahler@lambdanet.net]
> Enviado el: martes 30 de octubre de 2001 18:02
> Para: Juniper-Nsp (E-Mail)
> Asunto: show label database for L3 VPN
>
> Hi,
>
> we're currently implementing a L3-VPN. On the Egress-PE I'm looking for a
> command to see an output where an incoming inner label and the assigned
> outgoing interface is listed.
> Any ideas ?
>
>
> ----------------------------------------------------------------
> Carsten Strahler
>
> IP Planning
>
> Lambdanet Communications GmbH (AS 13237)
> Guenther-Wagner-Allee 13
> D-30177 Hannover (Germany)
>
> Phone +49 (0)511 / 84 88 - 12 86
> Fax +49 (0)511 / 84 88 - 12 59
> mailto:carsten.strahler@lambdanet.net
>
> web: www.lambdanet.net
> -----------------------------------------------------------
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:37 EDT