Hi,
thanks for help.
I tried this command before posting to this list. But I didn't find a
matching entry in the table. After a reboot this night it's back.
I'll contact Juniper support for further help.
----------------------------------------------------------------
Carsten Strahler
IP Planning
Lambdanet Communications GmbH (AS 13237)
Guenther-Wagner-Allee 13
D-30177 Hannover (Germany)
Phone +49 (0)511 / 84 88 - 12 86
Fax +49 (0)511 / 84 88 - 12 59
mailto:carsten.strahler@lambdanet.net
web: www.lambdanet.net
-----------------------------------------------------------
> -----Ursprüngliche Nachricht-----
> Von: Javier Antich [mailto:javier.antich@telindus.es]
> Gesendet: Dienstag, 30. Oktober 2001 19:11
> An: Strahler, Carsten; Juniper-Nsp (E-Mail)
> Betreff: RE: show label database for L3 VPN
>
>
> show route table mpls.0
>
> there you should see something like
>
> 100005 *[VPN/7] 02:16:09, metric 1
> > via so-0/0/3.0, Pop
>
> where 100005 is the VPN label for one of the vrfs configured
> in this PE, and
> that label is asigned for the outgoing interface so-0/0/3.0
>
>
> ^ ^
> ==============ooo====(.)v(.)====ooo=====
> Javier Antich Romaguera
> Network Consultant
> --------------------------------------------------------------
> -------------
> TELINDUS
> Pza. Ciudad de Viena, 6-2º
> 28040 Madrid
> --------------------------------------------------------------
> -------------
> javier.antich@telindus.es
> tel: +34 91 456 00 08
> fax: +34 91 536 10 74
> --------------------------------------------------------------
> -------------
> For more information about our products and services,
> please visit our website http://www.telindus.com
> --------------------------------------------------------------
> -------------
> Full connectivity & mobility
> ==================ooo0===0ooo========
>
>
>
> > -----Mensaje original-----
> > De: Strahler, Carsten [SMTP:Carsten.Strahler@lambdanet.net]
> > Enviado el: martes 30 de octubre de 2001 18:02
> > Para: Juniper-Nsp (E-Mail)
> > Asunto: show label database for L3 VPN
> >
> > Hi,
> >
> > we're currently implementing a L3-VPN. On the Egress-PE I'm
> looking for a
> > command to see an output where an incoming inner label and
> the assigned
> > outgoing interface is listed.
> > Any ideas ?
> >
> >
> > ----------------------------------------------------------------
> > Carsten Strahler
> >
> > IP Planning
> >
> > Lambdanet Communications GmbH (AS 13237)
> > Guenther-Wagner-Allee 13
> > D-30177 Hannover (Germany)
> >
> > Phone +49 (0)511 / 84 88 - 12 86
> > Fax +49 (0)511 / 84 88 - 12 59
> > mailto:carsten.strahler@lambdanet.net
> >
> > web: www.lambdanet.net
> > -----------------------------------------------------------
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:37 EDT