-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
show chassis ssb
That shows the CPU utilization... however I don't think its a concern
unless you are doing sampling.
show pfe statistics traffic
Shows the packet per second load on the IP2 ASIC, and other info...
- -----Original Message-----
From: Preggie Govender [mailto:pgovender@grintek.com]
Sent: Wednesday, November 21, 2001 3:00 AM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] Checking processor load
Hi,
How can you check the load on the SSB/FEB of a Juniper router ?
Regards,
Preggie Govender
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.
www.mimesweeper.com
**********************************************************************
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com>
iQA/AwUBO/u8zc9/cCqjBxGyEQK8XgCgyByfJ95KwPxymUBrJ4hJap1KrDMAn0ns
KdXHGENPmqgfszzKY6gLUb5b
=Tu7+
-----END PGP SIGNATURE-----
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT