Hello everyone,
I would like to know if and how could we limiting the traffic on an
interface depending on the IP Source Addresse ?
For example , on an interface fe-0/0/0 , I would like to rate limit the
incoming traffic from 10.1.0.0/24 at 2 Mbps and the traffic from 10.2.0.0/24
at 10 Mbps
Is someone have an example of the Firewall configuration ?
Thanks for your help
Regards
Mourad
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT