-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Check out RANCID. It is a very good version/change control tool.
http://www.shrubbery.net/rancid/
- - Andrew Elliott
> -----Original Message-----
> From: Aviva Garrett [mailto:aviva@juniper.net]
> Sent: Wednesday, December 19, 2001 9:34 AM
> To: Manpreet Singh
> Cc: juniper-nsp@puck.nether.net; aviva@juniper.net
> Subject: Re: Method to find any changes in configuration
>
>
> There's a "compare" command built in to the CLI. The general syntax
> is
> show configuration | compare
>
> For information, see
> http://www.juniper.net/techpubs/software/junos51/swconfig51-ge
> tting-started/html/swconfig51-cli-operational-mode7.html
>
> Thanks,
> ..Aviva
>
> In message <3C20AC9C.F82D9FDE@ispsoft.com>you write:
> > Hi,
> > I'd like to be informed whenever changes are made to the
> > Juniper router's configuration. Are there any mechanisms to do
> > this
> ? The one
> > simple solution i know of is, repeatedly polling the router
> and matching
> > the running-config with the version present in my version control
> > system. A pointer to any better approach is appreciated.
> >
> >
> > -Thanks in Advance,
> >
> > Manpreet
> >
>
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com>
iQA/AwUBPCDW/alwIF9dmYbBEQIJZQCfWkQryklRTTGHjQLQao1EboXTnh4AoPgW
lKhVqbAb564WsZqu35XsnpBZ
=510r
-----END PGP SIGNATURE-----
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT