Edson,
I've never played with a Juniper, but since Teknor is a well known "SBCs and
alike" vendor, you may be able to find docs on it at http://www.teknor.com
<http://www.teknor.com> , I recall jumpers and etc to "change" the behaviour
of the board (like enable some options in the BIOS and etc.)
Also, you may want to check with your support if these kind of changes would
not void your warranty etcetc
-----Original Message-----
From: Edson Rogerio Cardoso [mailto:edson.cardoso@gvt.net.br]
Sent: Friday, December 21, 2001 7:13 AM
To: 'juniper-nsp@puck.nether.net'
Subject: [j-nsp] RE Setup
All,
During the Routing Engine restart the Tekknor screen appears and the
expression "Press DEL to enter setup" is shown.
I'm using Tera Term and Hiperterminal but nothing happens when I press the
DEL key. Is there any secret to access the Bios Setup in the Juniper boxes
??.
I'm trying to enter de Bios Setup because a problem with Hard Disk. The
system is showing "device not configured".
Tnks
Edson R. Cardoso
System Engineer
<mailto:ecardoso@qos.com.br> ecardoso@qos.com.br
QoS - Quality of Service
Juniper Authorized Trainning Center
www.qos.com.br <http://www.qos.com.br>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT