RE: [j-nsp] Commit attribute to back-up RE

From: Andrew Ramsey (akramsey@juniper.net)
Date: Wed Jan 09 2002 - 13:19:34 EST


Neil,
 
It's 5.1. Try this.
 
http://www.juniper.net/techpubs/software/junos51/swconfig51-getting-started/html/cli-configuration-mode25.html
 
Andy

-----Original Message-----
From: Neil Stirling [mailto:neil.stirling@nortelnetworks.com]
Sent: Wednesday, January 09, 2002 12:39 PM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] Commit attribute to back-up RE

All,

A general question regarding the ability to quick-copy config's to the backup re;

Currently to copy config's across to a back-up re I use the command 'file copy <filename> re1:<path><filename>'.
However, this still needs me to login to the re and edit, load override, change hostname & management fxp0 address & commit.

1. I'm trying to find out if there is a shorter way of committing to re0, and then being able to commit to re1 as well (without actually going into the re) ?

2. Failing that, can you specify 'commit override' but put in a set of identifiers not to override host-name & fxp0 inet address (merge maybe) ?

Juniper guys - is there a planned release to allow a commit in re0: as well as a tag to commit to re1:, but with a set of identifiers for changes, i.e.;

                                        (from re0:)# commit re1 host-name HMD_M160.1 fxp0 10.156.16.161 [enter]

Any help appreciated, not urgent, but interested nevertheless.

Cheers ;>).

Neil.



This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT