Re: [j-nsp] how to form an IBGP neighbor between juniper and cisco ?

From: Shawn Blosser (sblosser@cytolytic.com)
Date: Tue Jan 22 2002 - 01:13:13 EST

I have always been under the impression ebgp-multihop is used on ebgp
sessions only...not sure if this will fix your issue.

-sb

On Tue, 22 Jan 2002, Raymond Leung wrote:

> why my 7206 said : " 2w0d: %BGP-3-NOTIFICATION: sent to neighbor
> 203.129.80.36 2/3 (BGP identifier wrong) 4 bytes 0A0A1802 "
>
> any idea ? Thx!!!!!!
>
>
> group zonaza {
> type internal;
> description iBGP-peer-to-7206;
> multihop ttl 3;
> peer-as 4841;
> neighbor 203.129.64.60;
> }
>
> neighbor 203.129.80.36 remote-as 4841
> neighbor 203.129.80.36 description iBGP peer to Juniper
> neighbor 203.129.80.36 ebgp-multihop 3
> neighbor 203.129.80.36 version 4
> neighbor 203.129.80.36 next-hop-self
> neighbor 203.129.80.36 soft-reconfiguration inbound
>
>
> --
>
> With Regards,
>
> Raymond Leung
> Network Analyst
> Zonasa Network Limited
>
> Suite 903,Technology Plaza
> 651 King's Road
> Quarry Bay
> Hong Kong
>
>
>

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Shawn Blosser
email: sblosser@cytolytic.com
mobile: 925-878-5228
"From many, one"

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT