Hi all,
I'm trying to get mcast traffic from a M-20 (Junos 5.2R1.4) with MRTG.
I have tried with the next OIDs with MRTG:
Under the experimental tree:
1.3.6.1.3.60.1.1.4.1.5.x& 1.3.6.1.3.60.1.1.4.1.6.x:ccccccc@rrrrrrrr
Under the management tree, using the Non-Unicast packets:
1.3.6.1.2.1.2.2.1.12.x&1.3.6.1.2.1.2.2.1.18.x:cccccccc@rrrrrrrrrr
And i always have the same answer: 0. The counters are always 0. And
that's wrong because there are mcast traffic.(I ve checked it, with
some sessions).
The router seems to recognice that OIDs, because doing an snmpwalk i receive
the correct SNMP Ifindex number of the interfaces running mcast (in the first
case) and all the interfaces (in the second case).
But the counters are always zero. Here you have the In output:
with the first OID:
.1.3.6.1.3.60.1.1.4.1.5.0 : INTEGER: 0
.1.3.6.1.3.60.1.1.4.1.5.26 : INTEGER: 0
.1.3.6.1.3.60.1.1.4.1.5.29 : INTEGER: 0
with the second OID:
.1.3.6.1.2.1.2.2.1.12.1 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.2 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.3 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.4 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.5 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.6 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.7 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.8 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.9 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.10 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.13 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.14 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.15 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.16 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.17 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.18 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.19 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.20 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.21 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.22 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.23 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.24 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.25 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.26 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.27 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.28 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.29 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.30 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.31 : Counter: 0
.1.3.6.1.2.1.2.2.1.12.32 : Counter: 0
Is there any other OID?
Does the Juniper needs any config?
Any ideas?
Thanks for all.
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:39 EDT