sounds a bit strange to me.
The VC ID field is used to uniquely identify a circuit of a given type
between two PE devices.
If you always set VC ID to zero then you can only ever have one circuit
of one type between two PEs :(
Giles
Robert O'Hara wrote:
> Hello Javier,
>
> I exchanged email with one of our key developers
> and he pointed out that we do not utilize the 'Group ID' field
> on the transmit side. He was uncertain as to whether or not
> we look at it the info on the receive side and I am still investigating
> that question.
>
> Also, for the 'VC-ID' field, we leave it marked at '0', and
> this indicates that we do not make use of this field at all.
>
> I'll let you know about the 'Group ID' on the receive
> side as soon as I hear back from a different developer.
> Stay tuned.
>
> Thanks,
>
> Bob O'Hara
>
> Systems Engineer
> Juniper Networks
> Northeast Region
>
> -----Original Message-----
> From: fraanro
> To: Robert O'Hara
> Cc: juniper-nsp@puck.nether.net; juniper@groupstudy.com
> Sent: 2/27/2002 9:49 AM
> Subject: Re: RE: Martini support in Juniper
>
> That means:
> a) The encapsulation used for Ethernet circuits is compliant to
> Martini.
> b) The signalling used is compliant with Martini.
>
> Now, Martini does not specify how to use the Group VC and VC ID fields.
> How does exactly Juniper use them? Is the VC ID field from the
> configuration mapped to the VC ID and the Group VC left to 0, for
> example?
>
>
> Thanks.
> Javier.
>
>
> ----- Mensaje Original -----
> Remitente: "Robert O'Hara" <rohara@juniper.net>
> Fecha: Miércoles, Febrero 27, 2002 5:39 pm
> Asunto: RE: Martini support in Juniper
>
>
>>Hello Javier,
>>
>>Prior to 5.0R4, when signalling the kompella-l2vpn, the
>>encapsulation codepoints were not compliant with what is specified in
>>draft-martini. So, Juniper changed those codepoints to be compliant.
>>This doesn't indicate that we are compliant with the encapsulation
>>formats specified in draft-martini. In fact, we are not compliant.
>>
>>So, what has changed were the values for encaps types
>>which are carried in the signalling part of draft-kompella.
>>
>>Whatever encapsulation types in draft-martini which REQUIRED
>>carrying of control words are not supported, e.g. Frame-relay and ATM
>>VC-MUX. So, we are compliant with the circuit types which DO NOT
>>REQUIRE a control word, e.g Ethernet.
>>
>>In Junos 5.2, we now support martini-signalling specified
>>in the draft-martini-trans. However, this is only for signalling.
>>So, Martini support for the various circuit types does not exist
>>in Junos 5.2.
>>
>>Hope this helps.
>>
>>Bob O'Hara
>>
>>Systems Engineer
>>Juniper Networks
>>Northeast Region
>>
>>
>>-----Original Message-----
>>From: fraanro
>>To: juniper-nsp@puck.nether.net
>>Cc: juniper@groupstudy.com; juniper-nsp@puck.nether.net
>>Sent: 2/27/2002 8:42 AM
>>Subject: Martini support in Juniper
>>Importance: High
>>
>>Hi all,
>>
>> In JUNOS 5.2 is supposed to support Martini. I see from the
>>documentation that for a circuit configuration you must configure
>>the
>>Virtual Circuit ID. Now the questions are:
>>- Is this configured paramenter mapped directly to the VC ID
>>field in
>>the LDP signalling VC FEC Element?
>>- Does Juniper's implementation of Martini use the Group ID for
>>anything?
>>- Does it use the VC Type values as defined in the draft, that is:
>> 0x0001 Frame Relay DLCI
>> 0x0002 ATM AAL5 VCC transport
>> 0x0003 ATM transparent cell transport
>> 0x0004 Ethernet VLAN
>> 0x0005 Ethernet
>> 0x0006 HDLC ( Cisco )
>> 0x0007 PPP
>> 0x8008 CEM [8]
>> 0x0009 ATM VCC cell transport
>> 0x000A ATM VPC cell transport
>>
>> - Does it support all the encapsulation types or are
>>there
>>restrictions?
>>
>>Thanks in advance.
>>Javier.
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
-- ================================================================= Giles Heron Principal Network Architect PacketExchange Ltd. ph: +44 7880 506185 "if you build it they will yawn" =================================================================
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:39 EDT