Where do you find these commands?
Thanks
DS
On Thu, 22 Mar 2001, Panu Suontausta wrote:
> Hi,
>
> You can enter a dummy AS number for the group, then it'll work...
>
> /* JUNOS syntax checker requires 'peer-as' config in peer group. '65535'
> is just
> a placeholder -- panu 100101 */
> protocols {
> bgp {
> group FICIX {
> type external;
> description "FICIX peers";
> advertise-inactive;
> damping;
> export [ Reject_unwanted_routes Ficix_out ];
> remove-private;
> peer-as 65535;
> neighbor 212.226.xx.xx {
> description xxx;
> import [ Reject_unwanted_routes xxxx_in ];
> peer-as xxxx;
> }
>
>
> panu
>
>
> Dave Humphrey wrote:
> >
> > Kurt,
> >
> > What version of code are you running? It can't be done with 4.3R2, you get the error
> >
> > humphrey@testrouter# commit and-quit
> > [edit protocols bgp]
> > external peer group test's AS number must be configured
> > error: configuration check-out failed
> >
> > [edit protocols bgp group test]
> > humphrey@testrouter#
> >
> > Where the group test looks thus:
> >
> > type external;
> > neighbor 195.66.224.88 {
> > peer-as 8582;
> > }
> > neighbor 195.66.224.82 {
> > peer-as 4513;
> > }
> >
> > I suspect that this may be a feature which is coming. Everyone I speak to about this
> > finds it a little frustrating.
> >
> > Depending on how you do your policies you can minimize the content of each group to just
> > a neighbor address, a description and a peer as.
> >
> > Dave Humphrey
> >
> > -----Original Message-----
> > From: Bauer Kurt [mailto:KBauer@ait.at]
> > Sent: 22 March 2001 09:15
> > To: Juniper-Nsp (E-Mail)
> > Subject: [j-nsp] AW: Juniper Config for Peering-points
> >
> > But as it seems to me, i can only configure one peer-as per group, but every
> > peer has a different AS. How do I do that ??
> >
> > regards,
> >
> > Kurt
> >
> > > -----Ursprüngliche Nachricht-----
> > > Von: Arnd Vehling [mailto:av@nethead.de]
> > > Gesendet: Donnerstag, 22. März 2001 10:15
> > > An: Bauer Kurt
> > > Cc: Juniper-Nsp (E-Mail)
> > > Betreff: Re: Juniper Config for Peering-points
> > >
> > >
> > > Hi,
> > >
> > > Bauer Kurt wrote:
> > > > is there an easy way to configure a lot of different peers
> > > with different
> > > > ASes on a Juniper (JunOS 4.3), other than to make a
> > > bgp-group for every peer
> > > > ?? Maybe one group for all peers or something similar ??
> > >
> > > You can make one group for all peers, sure.
> > >
> > > > I just couldn't find anything regarding this problem in the manual.
> > >
> > > It sure is in the manual.
> > >
> > > regards,
> > >
> > > Arnd
> > > --
> > > NetHead Network Design and Security
> > > Arnd Vehling av@nethead.De
> > > Gummersbacherstr. 27 Phone: +49 221 8809210
> > > 50679 Köln Fax : +49 221 8809212
> > >
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:41 EDT