You should be changing the device or family MTU, not messing with the
protocols. The MTU setting for OSPF is for testing purposes; there's
a reason that it's hidden. Shoulda ripped out that bit of code...
X-JNPR-Received-From: outside
Date: Thu, 31 May 2001 08:17:00 -0700 (PDT)
From: David Murphy <dave_murphy_1@excite.com>
Cc: juniper-nsp@puck.nether.net
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Mailer: Excite Inbox
X-Sender-Ip: 202.109.78.181
Hi,
Thanks, the ospf works fine now.
then how about rip? I can not find a method to change mtu under rip.
Dave
On Thu, 31 May 2001 01:56:45 -0700, Stephen Stuart wrote:
> > The most common cause of stuck-in-exstart is an MTU mismatch. If not,
> > turn on some tracing and see what OSPF has to say about it.
>
> IGMP snooping needs to be configured or disabled if the switch is
> blocking multicast to ports from which no IGMP join messages were
> detected.
>
> Stephen
_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:42 EDT