[alcatel-nsp] 7710 SR: limits of the routing table (hardware limits)
GARCIA DEL RIO Diego
Diego.Garcia_Del_Rio at alcatel-lucent.be
Fri Jul 24 05:03:23 EDT 2009
Both IPV6 and IPV4 are handled in hardware. There is no software-based routing in the SR series.
Diego Garcia del Rio
New Product Introduction - Network Design Engineer
Alcatel-Lucent - Antwerpen
Mobile: +32 4734 30 245
OnNET 2 605 3871
Phone (+32) 3 2403871
e-mail diego.garcia_del_rio at alcatel-lucent.com
This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this message. Any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited without the prior consent of its author.
From: alcatel-nsp-bounces at puck.nether.net [mailto:alcatel-nsp-bounces at puck.nether.net] On Behalf Of Oriana Palivan
Sent: 24 July 2009 10:54
To: alcatel-nsp at puck.nether.net
Subject: [alcatel-nsp] 7710 SR: limits of the routing table (hardware limits)
I am looking for the hardware limits of the routing table of an 7710 SR (I have an SR4). If someone
- Ipv4 routing table: I have in mind that it can handle 1 million routes on hardware level, is it right?
- Ipv6 routing table: is it handled on hardware level also, or only software? Does anyone knows what is the limit of the routing table for ipv6?
Here are the details of my 7710 SR routers :
CPU Control FPGA version is 0x29
Boot rom version is v29
CFMCTL FPGA version is 0x29
CCM FPGA version is 0x99
Thanks a lot.
Kind regards, Oriana Palivan
Fibre Lac SA
Av. Paul-Cérésole 24
CH - 1800 Vevey
Fixe : +41 21 923 31 52
Mobile: +41 78 889 32 06
Fax : +41 21 923 31 55
oriana.palivan at fibrelac.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the alcatel-nsp