[alcatel-nsp] QoS for Priority of icmp on VPLS
Otta lavel
ma69.ka69 at gmail.com
Tue Mar 24 07:00:57 EDT 2009
hi,
The below is sample conf.
Default FC is "be", so "ef" is higher priority than be on SW fabric.
If you need rate limit, you can use rate command in "queue 2".
=============================
sap-ingress 10 create
queue 1 create
exit
queue 2 create
exit
queue 11 multipoint create
exit
fc "ef" create
queue 2
exit
ip-criteria
entry 10 create
match protocol icmp
exit
action fc "ef"
exit
exit
exit
=============================
Regards,
Otta
2009/3/23 Andhy Indarto <andhy.indarto at indosat.com>
> _______________________________________________
> alcatel-nsp mailing list
> alcatel-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>
> Dear all,
>
> I would like to prioritize icmp on VPLS instances and I would like to do it
> on 7750 SR.
>
> Does anybody have a sample config or how to do it ?
>
> Thank you for your kind attention and information.
>
> Regards,
>
> andhi indarto
>
> *****
> "This message is intended only for recipients who are authorized to receive it.
> It contains confidential and/ or legally priveleged information belong to PT INDOSAT Tbk ("INDOSAT"), therefore the authorized recipients shall protect this confidential information disclosed pursuant to provisions of Indosat's policy.
> If you are not a valid recipient of this message, please delete it from your system and/ or destroy all of the tangible material produced from the information herein together with all copies or reproductions thereof and notify the sender immediately.
> Please also be notified that any disclosure, copying, distribution or taking any action based on the contents of this message is strictly prohibited and may be unlawful".
> *****
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/alcatel-nsp/attachments/20090324/2a063741/attachment.html>
More information about the alcatel-nsp
mailing list