[alcatel-nsp] Advertising prefixes to BGP peer.

Bryan deadheadblues at gmail.com
Mon Dec 13 16:29:24 EST 2010


Ok, good to know!

On Mon, Dec 13, 2010 at 2:25 PM, Scott Weeks <surfer at mauigateway.com> wrote:
>
>
>
> On Mon, Dec 13, 2010 at 2:04 PM, Scott Weeks <surfer at mauigateway.com> wrote:
>> --- deadheadblues at gmail.com wrote:
>> From: Bryan <deadheadblues at gmail.com>
>>
>> I dont think this is possible, Cisco has a way of "injecting" more
>> specifics, but I dont think ALU does...or at least havent come across
>> it.
>> -------------------------------------------
>>
>>
>> Yes, they do.  But, if the more specifics aren't in your routing table you can't advertise them to your upstreams.  As someone previously mentioned, either the downstream customer announces the more specifics or you create them with a null route.  But the null route will show a different origination ASN than the customer's.
> ----------------------------------------------------------
> ---------------------------------------------------------
> --- deadheadblues at gmail.com wrote:
> From: Bryan <deadheadblues at gmail.com>
>
> I was referring to the ability to inject specifics that are not in the
> routing table. This is available in Cisco IOS.
> ------------------------------------------------------
>
>
>
>
> You can inject specifics that're not in the routing table by the use of a null route.
>
> scott
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>>
>> scott
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> --------------
>> ---------------
>> --------------
>> _______________________________________________
>> alcatel-nsp mailing list
>> alcatel-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>>
>
>
>



More information about the alcatel-nsp mailing list