[alcatel-nsp] rstp on vpls sap
Ryan Landry
Ryan.Landry at TELUS.COM
Tue Feb 23 15:02:33 EST 2010
are you sure you don't have a loop? top change count = 792 ... ? seems fairly high. what does the root bridge say?
.rL
On 2010-02-23, at 12:53 PM, Dinesh wrote:
> Hi,
>
> I have a attachment port in a vpls, have enabled stp over it, but still the operation status shows DOWN ? any help will be appreciated.
>
> *B:NS072450653>config>service>vpls# info
> ----------------------------------------------
> def-mesh-vc-id 12351001
> stp
> no shutdown
> exit
> sap 2/1/9:2901 create <<<< stp enabled on this attachment port...
> stp
> priority 96
> exit
> exit
> spoke-sdp 3:12351001 create
> exit
> spoke-sdp 4:12351001 create
> exit
> no shutdown
>
> *B:NS072450653# show service id 103 stp
> ===============================================================================
> Stp info, Service 103
> ===============================================================================
> Bridge Id : 80:03.00:16:4d:6d:ca:8c Top. Change Count : 792
> Root Bridge : 10:00.00:30:88:04:04:24 Stp Oper State : Up
> Primary Bridge : N/A Topology Change : Inactive
> Mode : Rstp Last Top. Change : 0d 00:04:40
> Vcp Active Prot. : N/A
> Root Port : 2050 External RPC : 10
> ===============================================================================
> Stp port info
> ===============================================================================
> Sap/Sdp/PIP Id Oper- Port- Port- Port- Oper- Link- Active
> State Role State Num Edge Type Prot.
> -------------------------------------------------------------------------------
> 2/1/9:2901 Down Disabled Discard 2048 False Pt-pt Rstp <<<<<<<<<<<<< ????
>
>
> B:NS072450653# show port 2/1/9
> ===============================================================================
> Ethernet Interface
> ===============================================================================
> Description : 1-Gig Ethernet SFP
> Interface : 2/1/9 Oper Speed : 1 Gbps
> Link-level : Ethernet Config Speed : N/A
> Admin State : up Oper Duplex : full
> Oper State : up Config Duplex : N/A
> Physical Link : Yes MTU : 1514
> IfIndex : 69500928 Hold time up : 0 seconds
> Last State Change : 02/23/2010 19:40:27 Hold time down : 0 seconds
>
>
> <ATT00001..txt>
More information about the alcatel-nsp
mailing list