[alcatel-nsp] rstp on vpls sap

[Dinesh]

Phil, Thanks,
The physical port is UP , but the sap is down...not sure why

*B:NS072450653# show  service id  103 sap

===============================================================================
SAP(Summary), Service 103
===============================================================================
PortId                          SvcId      Ing.  Ing.    Egr.  Egr.   Adm
Opr
                                           QoS   Fltr    QoS
Fltr
-------------------------------------------------------------------------------
2/1/9:2901                      103        1     none    1     none   Up
Down
-------------------------------------------------------------------------------
Number of SAPs : 1


On Tue, Feb 23, 2010 at 12:01 PM, Phil Bedard <philxor at gmail.com> wrote:

> Is the sap actually up?   if you do a show service id 103 sap ?
>
> Phil
>
>
> On Feb 23, 2010, at 2:53 PM, Dinesh wrote:
>
> > Hi,
> >
> > I have a attachment port in a vpls, have enabled stp over it, but still
> the operation status shows DOWN ? any help will be appreciated.
> >
> > *B:NS072450653>config>service>vpls# info
> > ----------------------------------------------
> >             def-mesh-vc-id 12351001
> >             stp
> >                 no shutdown
> >             exit
> >             sap 2/1/9:2901 create            <<<< stp enabled on this
> attachment port...
> >                 stp
> >                     priority 96
> >                 exit
> >             exit
> >             spoke-sdp 3:12351001 create
> >             exit
> >             spoke-sdp 4:12351001 create
> >             exit
> >             no shutdown
> >
> > *B:NS072450653# show  service  id 103 stp
> >
> ===============================================================================
> > Stp info, Service 103
> >
> ===============================================================================
> > Bridge Id          : 80:03.00:16:4d:6d:ca:8c  Top. Change Count : 792
> > Root Bridge        : 10:00.00:30:88:04:04:24  Stp Oper State    : Up
> > Primary Bridge     : N/A                      Topology Change   :
> Inactive
> > Mode               : Rstp                     Last Top. Change  : 0d
> 00:04:40
> > Vcp Active Prot.   : N/A
> > Root Port          : 2050                     External RPC      : 10
> >
> ===============================================================================
> > Stp port info
> >
> ===============================================================================
> > Sap/Sdp/PIP Id     Oper-     Port-      Port-       Port-  Oper-  Link-
>  Active
> >                    State     Role       State       Num    Edge   Type
> Prot.
> >
> -------------------------------------------------------------------------------
> > 2/1/9:2901         Down      Disabled   Discard     2048   False  Pt-pt
>  Rstp                <<<<<<<<<<<<< ????
> >
> >
> > B:NS072450653# show  port 2/1/9
> >
> ===============================================================================
> > Ethernet Interface
> >
> ===============================================================================
> > Description        : 1-Gig Ethernet SFP
> > Interface          : 2/1/9                      Oper Speed       : 1 Gbps
> > Link-level         : Ethernet                   Config Speed     : N/A
> > Admin State        : up                         Oper Duplex      : full
> > Oper State         : up                         Config Duplex    : N/A
> > Physical Link      : Yes                        MTU              : 1514
> > IfIndex            : 69500928                   Hold time up     : 0
> seconds
> > Last State Change  : 02/23/2010 19:40:27        Hold time down   : 0
> seconds
> >
> >
> > _______________________________________________
> > alcatel-nsp mailing list
> > alcatel-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/alcatel-nsp
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/alcatel-nsp/attachments/20100223/93d3983e/attachment-0001.html>