[alcatel-nsp] What is the default value of MBS on access queues?

[Robert J. Huey]

show pools slot/mda[/port] access-ingress

Example:   Here's a simple NULL encap (2/1/10) ePipe assigned to service-id 73 with no (read: default) ingress/egress queues assigned.
  

*A:ESS-12# show pools 2/1/10 access-ingress 

===============================================================================
Pool Information
===============================================================================
Port                 : 2/1/10                                                  
Application          : Acc-Ing           Pool Name          : default          
Resv CBS             : Sum                                                     
-------------------------------------------------------------------------------
Utilization                   State       Start-Avg    Max-Avg    Max-Prob
-------------------------------------------------------------------------------
High-Slope                    Down              70%        90%         80%
Low-Slope                     Down              50%        75%         80%
 
Time Avg Factor      : 7                                                       
Pool Total           : 12288 KB                                                
Pool Shared          : 8192 KB           Pool Resv          : 4096 KB          
 
Pool Total In Use    : 0 KB                                                    
Pool Shared In Use   : 0 KB              Pool Resv In Use   : 0 KB             
WA Shared In Use     : 0 KB                                                    
 
Hi-Slope Drop Prob   : 0                 Lo-Slope Drop Prob : 0                
-------------------------------------------------------------------------------
Name                          FC-Maps       MBS       HP-Only A.PIR    A.CIR
                                            CBS       Depth   O.PIR    O.CIR
-------------------------------------------------------------------------------
73->2/1/10->1
                              be l2 af l1   1280      256     1000000  0       
                              h2 ef h1 nc   0         0       Max      0       
===============================================================================


I hope this helps. 

rgds,
    --r 
 


On Jul 28, 2010, at 3:00 PM, Kila Hsu wrote:

> Hi All,
> 
> Anyone have an idea what might be the default value of MBS/CBS on queues that are configured on SAP ingress/egress QoS policy?
>> From the configuration guides, the default value is "default", which does not quite answer the question...
> Would it be something that is MDA-specific, or some hard-coded value?
> 
> Thanks a lot for any answer.
> Kila Hsu
> 
> 
> 
> _______________________________________________
> alcatel-nsp mailing list
> alcatel-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/alcatel-nsp