[alcatel-nsp] log message

[Mark Ivens]

Hi Soon Lee,

If you have the SNMP MIBs distributed with the 7750 loaded into your
network management server then you should be able to look up what those
particular tables are - see below.

M

$ snmptranslate -Td -IR mplsTunnelARHopTable
MPLS-TE-STD-MIB::mplsTunnelARHopTable
mplsTunnelARHopTable OBJECT-TYPE
  -- FROM	MPLS-TE-STD-MIB
  MAX-ACCESS	not-accessible
  STATUS	current
  DESCRIPTION	"The mplsTunnelARHopTable is used to indicate the
             hops for an MPLS tunnel defined in mplsTunnelTable,
             as reported by the MPLS signalling protocol. Thus at
             a transit LSR, this table (if the table is supported
             and if the signaling protocol is recording actual
             route information) contains the actual route of the
             whole tunnel. If the signaling protocol is not
             recording the actual route, this table MAY report
             the information from the mplsTunnelHopTable or the
             mplsTunnelCHopTable.

            Each row in this table is indexed by
             mplsTunnelARHopListIndex. Each row also has a
             secondary index mplsTunnelARHopIndex, corresponding
             to the next hop that this row corresponds to.


$ snmptranslate -Td -IR vRtrMplsXCTable
TIMETRA-MPLS-MIB::vRtrMplsXCTable
vRtrMplsXCTable OBJECT-TYPE
  -- FROM	TIMETRA-MPLS-MIB
  MAX-ACCESS	not-accessible
  STATUS	current
  DESCRIPTION	"This table has an entry for each mplsXCEntry
         in the mplsXCTable.  It serves as an another
         indirect index to the mplsXCTable."

$ snmptranslate -Td -IR mplsXCTable
MPLS-LSR-STD-MIB::mplsXCTable
mplsXCTable OBJECT-TYPE
  -- FROM	MPLS-LSR-STD-MIB
  MAX-ACCESS	not-accessible
  STATUS	current
  DESCRIPTION	"This table specifies information for switching
        between LSP segments.  It supports point-to-point,
        point-to-multipoint and multipoint-to-point
        connections.  mplsLabelStackTable specifies the
        label stack information for a cross-connect LSR and
        is referred to from mplsXCTable."