[alcatel-nsp] How to perfom bandwidth ratio on 7750

[Magic Hand]

Hello Garcia,

So far so good. I'm interested to know that "fancier thing" you've mentioned. I have a few 7x50 in my network but nobody really know how to handle these powerful boxes.. :)

From: diego.garcia_del_rio at alcatel-lucent.com
To: magic.hand at live.com; jonathon.exley at kordia.co.nz; alcatel-nsp at puck.nether.net
Date: Mon, 30 Apr 2012 06:07:37 +0200
Subject: Re: [alcatel-nsp] How to perfom bandwidth ratio on 7750





Cool. Let me know how it worked. There a lot fancier things you can do, but this should be a good start. 


Diego Garcia del Rio

Product Management, IPD

Mountain View,CA

+1 (415) 439-9420


 



From: Magic Hand [mailto:magic.hand at live.com]

Sent: Monday, April 30, 2012 05:35 AM
To: Garcia Del Rio, Diego (Diego); jonathon.exley at kordia.co.nz <jonathon.exley at kordia.co.nz>; alcatel-nsp at puck.nether.net <alcatel-nsp at puck.nether.net>

Subject: RE: [alcatel-nsp] How to perfom bandwidth ratio on 7750

 


Diego,

thanks for your help. Done that. monitoring the traffic pattern now..

From: diego.garcia_del_rio at alcatel-lucent.com
To: magic.hand at live.com; jonathon.exley at kordia.co.nz; alcatel-nsp at puck.nether.net
Date: Sat, 28 Apr 2012 01:19:02 +0200
Subject: RE: [alcatel-nsp] How to perfom bandwidth ratio on 7750


A way of achieving this would be setting up 3 LSPs, using strict paths. Route two LSPs over the 200M link and only a single one over the 100M link. Enable ECMP and you should get a semi-fair traffic distribution. Of course, setting egress rate (under “configure port x/y/z thernet egress-rate”  ) to the carrier policed values will also help in case of temporary burst.   DIEGO GARCÍA DEL RIOALCATEL-LUCENTIPD PRODUCT MANAGEMENT777 E. Middlefield RdMountain View CA 94043Mobile: +1 (415) 439-9420OnNet: 2852-2726diego.garcia_del_rio at alcatel-lucent.com From: alcatel-nsp-bounces at puck.nether.net [mailto:alcatel-nsp-bounces at puck.nether.net] On Behalf Of Magic Hand
Sent: Thursday, 26 April 2012 11:19 PM
To: jonathon.exley at kordia.co.nz; alcatel-nsp at puck.nether.net
Subject: Re: [alcatel-nsp] How to perfom bandwidth ratio on 7750 Jonathan,

thanks, 

at the moment, i am looking for egress limit configuration. i have few LSPs from 7750 to those 2 MX960s. maybe i'll need to trim down my LSPs and then set egress limit accordingly?

one more thing, that egress is suppose to be my bandwidth?From: Jonathon.Exley at kordia.co.nz
To: alcatel-nsp at puck.nether.net
Date: Fri, 27 Apr 2012 04:45:06 +0000
Subject: Re: [alcatel-nsp] How to perfom bandwidth ratio on 7750That’s a really open question.It really depends upon what sort of traffic you have.You can set an egress rate limit on the port, but I think you want to do some sort of traffic engineering.If you are using MPLS you can create LSPs via the different ports and assign traffic to those LSPs to balance the traffic.If you are using BGP you can advertise different routes out of each peering session in influence the inbound traffic, and set the local preference to influence the outbound traffic.If you are wanting to form a LAG bundle, you will need links with the same speed. Jonathon  From: alcatel-nsp-bounces at puck.nether.net [mailto:alcatel-nsp-bounces at puck.nether.net] On Behalf Of Magic Hand
Sent: Friday, 27 April 2012 3:39 p.m.
To: alcatel-nsp at puck.nether.net
Subject: [alcatel-nsp] How to perfom bandwidth ratio on 7750 Hello,

I am having a 7750 box which connecting to two Juniper MX960. One of the interface is having 200 Mbps fiber link and the other interface is having 400 Mbps link. Let say I having 300 Mb traffics, can someone guide me how to configure on both ports for to distribute traffics in 2:1 ratio? Meaning, 200 Mb will go thru the 400 Mbps link and the remaining will be going thru the 200 Mbps link.


Thanks in advance.This email and attachments: are confidential; may be protected by privilege and copyright; if received in error may not be used, copied, or kept; are not guaranteed to be virus-free; may not express the views of Kordia(R); do not designate an information system; and do not give rise to any liability for Kordia(R). 
_______________________________________________ alcatel-nsp mailing list alcatel-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/alcatel-nsp 		 	   		   		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/alcatel-nsp/attachments/20120503/a7a40bfc/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 1352 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/alcatel-nsp/attachments/20120503/a7a40bfc/attachment.gif>