Disk Cap help

[Ken Beach]

Z5U stands for the ceramic material in the cap.  We use these kind of
capacitors for bypassing where capacitance value is not critical.  You
can check this out on Kemet's web site.  Z5U caps are not used where any
tuned circuit is involved.  The material has a high temperature
coeficient and a high disapation factor.  I don't know about the voltage
rating from the post, unfortunately.

Ken Beach

Brian Carling wrote:
>
> I think that the Z5U may indicate the voltage rating.
>
> It is likely a 50V cap, but could be 500V
>
> Anyone??
> ****************************************************
> *** 73 from Radio AF4K/G3XLQ Gaithersburg, MD USA  *
> **  E-mail to:  bry at mnsinc.com                     *
> *** ICQ 6124470  ***
> **  http://www.mnsinc.com/bry/                     *
> ****************************************************
> AM International #1024, TENTEN #13582. GRID FM19. Rigs: Valiant, DX-60/HG-10, FT-840, TM-261A, Harvey Wells Bandmaster.
> TEN-TEN #13582, DXCC #17763, Bicentennial WAS
>
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
> To subscribe: listserv at listserv.tempe.gov
> and in body: subscribe BOATANCHORS yourfirstname yourlastname
> To unsubscribe:  listserv at listserv.tempe.gov
> and in body: signoff BOATANCHORS
> Archives for BOATANCHORS: http://www.tempe.gov/archives
> --- --- --- --- --- --- --- --- --- --- --- --- --- --

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe BOATANCHORS yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff BOATANCHORS
Archives for BOATANCHORS: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --