Der Audio Kooken

[Dexter Francis]

Jeff asks:

"How do I connect that 8-foot pipe to the antenna terminal of my SX-101
w/o using wire?"

Jeff - there is only one way to do this;  You must use a 64 bit wide x
64 times oversampling A to D and D to A converters and send the signals
via broadband infa-red thru a custom built light-pipe.  Nothing else has
the bandwith or can avoid the EMI.  (This is actually the key technology
in the long awaited "fired-wired" IRDA technology that all the wrist
held "wrist-roc" computers are using.)  Don't forget that you must
implement this with hand matched Lithuanian made Amperite "Booger-Boy"
tubes with 666 date codes, palladium plated pins and socket contacts
using a circuit design done by a full blood offspring of Howard Hughes.

-- df

Now if it was a REAL radio application you could just by something with
a Collins logo on it and plug it in....

*** CWest - P.O. Box 22443 Salt Lake City, Utah 84122 ***
  Visit our Web Page @ http://www.xmission.com/~cwest

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe BOATANCHORS yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff BOATANCHORS
Archives for BOATANCHORS: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --