Info on HP-606A sig gen

[Ken Beach]

E A R L wrote:
>
> Hello,
> I have an HP-606A signal generator I am restoring. I need the 606A-34A
> output 50 ohm termination. Could someone help me with this? I`d like to
> buy or swap for one. If some of you know of a suitable substitute, I`m
> interested.
> Thanks,
> Earl........K5FTE
>
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
> To subscribe: listserv at listserv.tempe.gov
> and in body: subscribe BOATANCHORS yourfirstname yourlastname
> To unsubscribe:  listserv at listserv.tempe.gov
> and in body: signoff BOATANCHORS
> Archives for BOATANCHORS: http://www.tempe.gov/archives
> --- --- --- --- --- --- --- --- --- --- --- --- --- --
Earl
        If this is a 50 ohm terminator for test purposes check out the Pomona
catalog.  They sell them.  I have a 606A and B.  Only the B works, I
havn't put any time on the A yet.  I think the B is a fine signal
generator.  I used it to line up a BC-779 in February and it went real
well.  I was able to set the receiver up without fussing with the
generator, especially during the sensitivity checks.  Having a built in
attenuator that really works is great from my point of view.

Ken Beach

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe BOATANCHORS yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff BOATANCHORS
Archives for BOATANCHORS: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --