RF connector query

[Dick Blaney]

The EICO 320/324 RF generators, and several 'scopes & other test equipment
of that era, used the "single button microphone connector", which can be
obtained from Mouser, ( (800)346-6873) Switchcraft, Mouser stock number
502-2501F, last price I have is $3.68 ea, (1 to 10).  Check the thread on
your connector, it should be a perfect fit for the threaded shell of a PL259
RF plug if it takes that mic connector.  Usually those connectors had a tan
fibre insulator and one solder button in the center.  Hope it helps.
73 de
Dick, WB8MHE
wb8mhe at bright.net


-----Original Message-----
From: Will White <wcw at USWEST.NET>
To: BOATANCHORS at LISTSERV.TEMPE.GOV <BOATANCHORS at LISTSERV.TEMPE.GOV>
Date: Sunday, April 11, 1999 6:36 PM
Subject: RF connector query


>I have an Eico 324 signal generator, no probe. I have to make one up. I am
>unfamiliar with the type of connector used with this piece of equipment,
>except that it (the RF out connector) is the same type as used on the
Heathkit
>Lunchboxes. What is the name/designation of this connector, and where can I
>buy one?
>--
>Will White, KD7BFX
>
>to reply, please click this link mailto:wcw at asu.uswest.net
>
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>To subscribe: listserv at listserv.tempe.gov
>and in body: subscribe BOATANCHORS yourfirstname yourlastname
>To unsubscribe:  listserv at listserv.tempe.gov
>and in body: signoff BOATANCHORS
>Archives for BOATANCHORS: http://www.tempe.gov/archives
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe BOATANCHORS yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff BOATANCHORS
Archives for BOATANCHORS: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --