JAN 1619/VT-164?

[John M Iverson]

this is a very interesting tube, a beam power amp, metal only.  2.5v @ 2a
quick heating fil. 15 w pl diss. pair in AB2 at 400v  6k load develops 36
watts.  looks a lot like a 6L6.
except for the filament instead of a cathode.  Heath used a pair in
paralell in a 400 v regulated power supply years ag.  I built an amp with
a pair to see what would happen.  very slight hum  but looked good.
73      old  jack

Jack Iverson    K0EWU    jackiv at juno.com
ARRL,  IEEE LM,  RCA, AMI, ARCI, QCWA

On Mon, 19 Apr 1999 20:16:13 -0500 Jeff Anderson <jeffa at IX.NETCOM.COM>
writes:
>I have a number of these tubes and was wondering if they
>cross to a standard tube number.
>
>Thanks!
>
>- Jeff, WA6AHL
>
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>To subscribe: listserv at listserv.tempe.gov
>and in body: subscribe BOATANCHORS yourfirstname yourlastname
>To unsubscribe:  listserv at listserv.tempe.gov
>and in body: signoff BOATANCHORS
>Archives for BOATANCHORS: http://www.tempe.gov/archives
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe BOATANCHORS yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff BOATANCHORS
Archives for BOATANCHORS: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --