FS: Drake & Heathkit Amp Plate Xmfrs

[Lane Zeitler]

I have a fully operational original Drake L4B plate xmfr. Nothing wrong with
it at all. It will come mounted in the L4PS chassis with a few orig.
components still in there but not many. No caps, diodes, etc...It does come
with the chassis cover also. 120/240 volt pri. Sec has the hi and lo tap
winding (I think it is on the sec.) for either high or low plate voltages. I
don't remember what the voltages are; somewhere around 1050 and 800 at 1
amp. $115 plus actual UPS ground shipping from San Diego 92139. Will include
a copy of the L4PS schematic. Will double box.

I also have an excellent Heathkit SB-1000 plate xmfr. This has the filament
winding for a single 3-500Z and a 10.5 volt control voltage winding. HV
winding is around 1100 vac at 500mA. 120 or 240 volt pri. Will include a
copy of the SB-1000 scat. Price is $100.00 plus actual shipping from San
Diego 92139. Will double box.

Both of these xmfrs were pulled by me from actual operating equipment.

Prices are firm. Thanks for the read.

Lane Zeitler
Ku7i
San Diego

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe BOATANCHORS yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff BOATANCHORS
Archives for BOATANCHORS: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --