Receiver alignment

[Ed Tanton]

True enough John... he couldn't do the lower IFs-you're absolutely
correct-my bad!... it's a fine old sig gen but wouldn't do for Drakes... I
forgot about that lower end being so (relatively) high. But he can ask the
guy I recommended (or whoever he picks to buy from) about it, and
specifically point out the need for a 50kHz signal. I think even my HP 8640B
doesn't go that low-in fact... my BC-221s don't go that low. On the other
hand, I have a 200kHz crystal somewhere, and it wouldn't be too tough to
divide that by 4, and put a small filter-shaping network on the output.

72 / 73  Ed  N4XY  email: <n4xy at mindspring.com>

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe BOATANCHORS yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff BOATANCHORS
Archives for BOATANCHORS: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --