ID Tube.

[Scott Johnson]

I Think it was used in the audio amp for som VRC stuff, the 26A7 was used in
28V plate applications, as well as the 28D7, its loctal brother
Scott
----- Original Message -----
From: "J. Forster" <jfor at QUIK.COM>
To: <BOATANCHORS at LISTSERV.TEMPE.GOV>
Sent: Saturday, October 25, 2003 8:25 PM
Subject: Re: ID Tube.


> I seem to remember some tubes like that being used in aircraft audio amps
for
> intercoms. They were run straight of the 26.5 VDC bus, with no dynamotor
for HV.
> FWIW.
>
> -J
>
> Chris Gill wrote:
>
> > G'Day All,
> > Anyone have an idea what equipment used a 26E6WG, I have a few here in
Mil
> > boxes, just don't know which radio gear used them.
> > Cheers,
> > Chris.
> > VK4YCG
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
> To post - BOATANCHORS at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/BOATANCHORS.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/BOATANCHORS.html